To Next PageTo Next Page
Need help?Do you have a question about the stayer SC250W and is the answer not in the manual?
Critical safety warning before performing maintenance or adjustments.
Important safety precautions for changing tools.
Steps for safely removing the current cutting disk.
Instructions for installing a new cutting disk.
Essential safety warnings before operating the machine.
Safety warnings specific to using the lower cutting table.
Safety warnings for using the machine as a circular saw.
Lists required PPE for operating the machine.
General safety rules to follow during operation.
Details risks associated with touching the rotating cutting disk.
Describes accidents during normal cutting.
Example accident scenario involving workpiece jerks.
Example accident scenario with short, manually held workpieces.
Risks when the disk spins idly and is accessible.
Risks from disk detachment due to spring failure.
Measures to avoid contact with the cutting disk.
Safety during the actual cutting process.
Preventing contact when the disk is idle.
Preventing disk falls from spring failure.
Critical warning about essential safety precautions.
Warning to unplug before maintenance.
Using recommended accessories and seeking qualified repair services.
Mandatory instruction to wear ear protection.
General| Power | 250 W |
|---|---|
| Blade Diameter | 85 mm |
| No-load speed | 4500 RPM |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power Source | Corded |
