stayer SC251W - User Manual

www.grupostayer.com
Area Empresarial Andalucía - Sector I
Calle Sierra de Cazorla nº7
C.P: 28320 Pinto (Madrid) SPAIN
Email: info@grupostayer.com
SC241W
SC250W
SC251W
SC261W
SC264W
SC265W
SC291W
SC2500W
SCE1650W
SLL265W
Manual de instrucciones
ESES
Istruzioni d’uso
IT
Operating instructions
GB
Bedienungsanleitung
DE
Instructions d’emploi
FR
Manual de instruções
P
Kullanma Kılavuzu
TR

Summary

Machine Usage Purposes

Machine Setup and Connection

Illustrated Description of Functions

Settings and Testing

Adjusting Lower Resting Position Lock

Steps to adjust the locking mechanism for the lower resting position of the machine head.

Horizontal Mitre Angle Adjustment

Vertical Mitre Angle Adjustment to 90°

Vertical Mitre Angle Adjustment to 45°

Changing Cutting Tools

Cutting Disk Removal

Instructions for safely removing the cutting disk from the machine.

Cutting Disk Installation

Steps for replacing the cutting disk with a new one.

Workpiece Securing for Operation

General Usage Instructions

Starting and Stopping Machine

Procedures for safely starting and stopping the machine.

Manual Switch Operation

Manual Switch Stop Operation

Locking Start Operation

Steps to start the machine using the locking button for continuous operation.

Stopping Machine with Locking

Lower Cutting Table Operations

Cutting Angle Adjustments on Lower Table

How to set horizontal and vertical inclined cuts on the lower table.

Setting Lower Table Cutting Stopper

Performing Cuts on Lower Table

Circular Saw Operation with Upper Table

Installing Stationary Safety Guard

Upper Table Adjustments

Height Adjustment

Cutting Width Adjustment

Using the Goniometer with Upper Table

Upper Table Cutting Operation

Precautions and Protective Garments

Special Safety Precautions

Preventing Cutting Disk Contact

Preventing Cut Workpiece Projection

Dust Extraction System

General Safety Instructions

Safe Operation Guidelines

Technical Specifications

Technical Data Table

stayer SC251W Specifications

General

Power source	Corded Electric
Blade diameter	250 mm
Blade bore	30 mm
Max cutting depth at 90 degrees	85 mm
No-load speed	5000 RPM
Max Cutting Depth at 45°	60 mm
Bevel Capacity	45°