Do you have a question about the stayer SC261W and is the answer not in the manual?
Lists and explains the numbered parts of the machine.
Safety warning before performing any intervention on the electrical tool.
Steps to set the horizontal mitre angle to -45° and +45°.
Step-by-step guide for removing and installing the cutting disk.
Do not use a machine in bad condition; comply with safety measures.
Guidelines for handling the tool and required personal protective equipment (PPE).
Details accidents related to contact with the rotating cutting disk.
Measures to prevent contact with the disk during operation and when idle.
Essential safety precautions when using electrical tools.
Comprehensive safety guidelines and technical details.
Loading...