stayer SC251W - Technical Data Table

Model: SC-241-W, SC-251-W,
SC-250-W, SC-261-W,
SC-264-W, SC-265-W,
SC-291-W, SC2500W,
SCE-1650-W, SLL-265-W
Are in conformity with the provisions of Directive
98/37/EU
As well as with the following regulations:
· UNE-EN-61029-1
· UNE-EN-61029-1/A11
· UNE-EN-61029-1/A12
· UNE-EN-61029-2/9
· UNE-EN-61029-2-11
· UNE-EN ISO 12100-1
· UNE-EN ISO 12100-2
· Directive 2004/108/EU
· Directive 2006/95/EU.
It has received a Type Certificate with the number
43/3M/02/000024 (SC241W, SC251W, SC250W,
SC265W, SCE1650W, SC261W, SLL265W,
SC291W, SC2500W)
43/3M/02/000025 (SC264W)
Issued by the notified body:
0056 ECA, ENTIDAD COLABORADORA DE LA
ADMINISTRACIÓN S.A.U.
Av. Roma, 21 / 43005 TARRAGONA
Signed: Ramiro de la Fuente
Director General
ENGLISH
39
39
The values given are valid for nominal voltages [U] 230/240 V ~ 50/60 Hz - 110/120 V ~ 60 Hz. For
lower voltage and models for specific countries, these values can vary .
Please observe the article number on the type plate of your machine. The trade names of the individual
machines may vary.
TECHNICAL DATA
Model
Absorved
power
rpm without
load
Weight kg
Protection
class
Noise K=3dB
L
PA
L
WA
SC241W
1500
3800
14.5
II
89
101
SC251W
1500
3800
14.5
II
89
101
SC261W
1500
3800
16.5
II
89
101
SC264W
1500
3800
12.8
II
89
101
SC265W
1500
3800
15.5
II
89
101
SC291W
1600
3000
17.5
I
86
98
SC2500W
1800
3800
15.5
II
86
101
SCE1650W
1600
2500 - 4000
15.5
II
89
101
SLL265W
1500
3800
16.2
II
89
101
SC250W
1800
4200
15.5
II
92
103
The warrantee is limited solely to manufacturing or
mechanization failures, and it ceases to exist when
parts thereof have been disassembled,
manipulated or repaired out of the manufacturing
plant.
STAYER obliges itself to repair or replace the
product or the parts thereof that may be faulty, free
of charge only after a check and at the exclusive
criterion of its technicians..
It is considered that all costs for transportation and
disassembling will be borne by the purchaser.
So as to facilitate the technicians' work, please
attach a description of the failures that the client has
noticed at the tool during the use thereof.
25.Declaration of Conformity
EU DECLARATION OF CONFORMITY
The undersigned: STAYER IBÉRICA S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía
Sector 1 - 28320 PINTO (MADRID)
Tel.: 902 91 86 81/ Fax: 91 691 91 72
CERTIFIES,
That the machine:
Type: COMBINED MITRE SAWING AND
BENCH SAWING MACHINES.