Stealth Cam FUSION - Advanced Camera Settings; Operating Hours Configuration; Longitude and Latitude Entry; Information Bar Display

Page 17
LONGITUDE and LATITUDE: This setting allows you
to manually enter the longitude and latitude of your
camera.
OPERATING HOURS: This feature allows you to
designate a time for the camera to be active.
OPTIONS:
24/7: Camera is always on
SCHEDULED: Selecting this will allow you to
enter a time range for the camera to be active
and operational. Camera will not take photos
outside of dened time range.
START TIME (HH:MM): Start time for
camera to be active
END TIME (HH:MM): Time at which you
want the camera to no longer be active
INFORMATION BAR: This setting is used to
tell the camera whether the Info Bar should be
displayed at the bottom of images.
OPTIONS: On | O󰀨
ERASE CARD: This setting is used to format the SD
memory card installed. Formatting your SD card will
ERASE ALL DATA PRESENT.
NOTE: After card is formatted it is impossible to
restore data that was present on card.