Stealth Cam PX Series User Manual

Page 10
MODE: This setting will change the operation
mode of the camera. Di󰀨erent operation modes will
have di󰀨erent adjustment settings
OPTIONS: Photo | Video
DATE: This setting is used by the camera to display
the correct date on the Info Bar of the image.
PHOTO BURST: This setting determines how
many photos are taken each time the camera is
activated.
OPTIONS: 1 photo – 6 photos
Note: This setting is only applicable in photo
mode.
DELAY: This setting is used to determine how long
the camera will wait before reinitializing the PIR
sensor after taking a photo.
OPTIONS: 5 sec | 10 sec | 15 sec | 30 sec |
60 sec | 120 sec
RESOLUTION: This setting will determine the
quality of each image. A higher quality will result in
better photos and take more memory space.
OPTIONS: Low | Medium | High
Note: This setting is only applicable in photo
mode.
VIDEO LENGTH: This setting is used to determine
the length of time, in seconds, of a video recording
OPTIONS: 5 sec | 15 sec | 30 sec
Note: This setting is only applicable in video
mode.
TIME: This setting is used by the camera to display
the correct time on the Info Bar of the image.
Camera Conguration cont.
FACTORY RESET: This option will reset the
camera to its factory defaults. This will erase any
CUSTOM camera setup present.
OPTIONS: Yes | No
DELETE SD: This setting is used to format the SD
memory card installed. Formatting your SD card
will ERASE ALL DATA PRESENT. To format card,
change setting to Yes and press Enter.
NOTE: After card is formatted it is impossible to
restore data that was present on card.
QUIT: Pressing Enter on this setting will allow you
to exit the camera conguration menu and return
your camera to a ready state.

Stealth Cam PX Series Specifications

General

Brand	Stealth Cam
Model	PX Series
Category	Scouting Camera
Language	English