Page 11
There are a few methods for viewing and deleting your les.
i. Using an SD Memory Card Reader/Viewer: You will simply
need to remove the SD card from the camera and insert it into
the reader to view the les; you can also delete them from this
device.
ii. Using your computer: This method requires an SD card slot to
be installed to your computer. Please refer to your computer’s
Owner’s Manual for the proper way of viewing the les.
iii. Obtain a mobile device adapter: This will allow you to plug one
end into the device, and, at the other end, insert the SD card.
Please refer to the vendor’s User Manual for the proper way of
viewing the les.
Viewing and Deleting Images
Test Mode
This setting is used to test the camera’s PIR sensor coverage area.
When in test mode, the green LED on the front of the camera will blink
GREEN when the camera detects motion. Use this mode to determine
if camera placement will capture desired movement.
To Next Page
Loading...
Need help?
General
