Page 11
LED Indicator Codes
Test your camera connection at any time by pressing the SYNC button. The SYNC
button will take a test photo and instantly attempt to upload it. If your camera is
successful you will see the photo appear in the COMMAND PRO app. Otherwise,
one of the following LED codes will display.
LED Key
Green Red
Battery Network Account
Flashing green Battery indicates checking
camera hardware status.
Solid green Battery and ashing Network
indicates checking camera for internet
connection.
Solid green Battery, Network, and ashing
Account indicates checking camera for
account.
3 Solid LEDs indicate account found and
camera is successfully registered.
All 3 LEDs will blink green to indicate
photo upload in progress. LEDs will turn
o to indicate camera is asleep and ready
for deployment.
Successful Connection Sequence
To Next Page
Loading...
Need help?
General
