Stealth Cam Reactor - Camera Settings; Time Zone and Format; Operation Mode; Photo Resolution

Page 16
TIME ZONE: This setting allows you to set your
camera to di󰀨erent time zones.
OPTIONS:
Eastern | Central | Mountain | Pacic |
Alaskan | Hawaiian
PHOTO BURST: This setting determines how
many photos are taken each time the camera is
activated.
OPTIONS: 1 photo – 9 photos
Camera Settings
TIME FORMAT: This setting is used by the camera to
change the display format for the time in the Info Bar
of the image.
OPTIONS:12 hr | 24 hr
NOTE: If 24 hour format is selected, previous SETUP
TIME will be adjusted and AM/PM will be removed
PIR DELAY: This setting is used to determine how
long the camera will wait before reinitializing
PIR sensor after taking a photo.
OPTIONS: 00m 03s – 59m 59s
CAMERA NAME: This setting is used to adjust
the camera name. Camera name can be up to 13
characters long using alpha (A-Z) numeric (0-9)
characters.
PHOTO RES: This setting will determine the
megapixel (MP) resolution of each image. A higher
MP count will result in better photos and take more
memory space.
OPTIONS: 4 MP | 8 MP | 16 MP | 26 MP
OPERATION MODE: This setting will change the
operation mode of the camera. Di󰀨erent operation
modes will have di󰀨erent adjustment settings.
OPTIONS: PIR Photo | PIR Video | Time Lapse
VIDEO RESOLUTION: This setting will determine
the quality of each video. A higher quality will result
in better videos and take more memory space.
OPTIONS: 1920 x 1080
REDUCE BLUR: This setting is used to determine if
the camera should use the MATRIX Blur technology
to dramatically reduce the blur e󰀨ect, resulting in
more clear night time infrared shots.
OPTIONS:
STANDARD: Minimize blurring e󰀨ect in images
while retaining long-range night image capability.
ADVANCED: Enhanced blur reduction providing
a balance between brightness and image
sharpness.
BURST INTERVAL: This setting allows you to set the
time interval between burst captures.
OPTIONS:1 sec - 5 sec