STEALTH ELECTRIC BIKES OWNER’S MANUAL
V 2.4 PAGE | 11
Before installing the battery, make sure that the foam surrounding the battery position is in place and intact.
Carefully position battery in opening and push into place. Be careful that battery doesn’t compress or pull on wiring or
brake lines as it is pushed into place. All wires, brake lines and gearbox controls should run above and below the battery,
nothing is to run between battery and side covers.
If the battery feels loose, add foam strips to the upper side of the housing so the battery fit is firm. Make sure that the
battery connectors are free and accessible.
To Next Page
Loading...
