STEALTH ELECTRIC BIKES OWNER’S MANUAL
V 2.4 PAGE | 42
9. The compression dampening adjustment has a high and low setting or more commonly known as “lock-out” and
“open”. The firmer setting (lock-out) resists pedal bob and increases pedalling efficiency, however the level of
traction is reduced.
MAINTENANCE SCHEDULE
Your Stealth Bike should be cared for and maintained according to the following schedule.
EVERY RIDE
Upon returning from each ride, perform the following checks and repairs.
1. Wipe down your bike and remove excess moisture from mainframe and hub motor. This is essential in maintaining
the electrical system of your bike.
2. Charge battery. REFER to Charging procedure pg. 15.
3. Wipe down stanchion tubes. Failure to keep these clean could result in oil loss and damage to your forks.
4. Check suspension fork bolts and clamps to ensure they are correctly secured.
5. Lubricate the chain especially after off road riding. (Silicone based chain lube is preferred).
6. Check the brakes for proper operation.
Many Stealth service and repair tasks require special knowledge and tools. Do not begin any adjustments
or service on your bike until you have learned from your dealer how to properly complete them.
Improper adjustment or service may result in damage to the bike or in an accident which can cause
serious injury or death.
To Next Page
Loading...
