STEALTH ELECTRIC BIKES OWNER’S MANUAL
V 2.4 PAGE | 32
TRIP INFORMATION
While riding, the Home Screen will display the current speed, power usage and battery life as well as some trip information.
Trip information can be scrolled through using the up and down directional buttons.
Trip A: Continuously records trip distance so it can be used to measure distance over a time frame of the rider’s choice (eg.
A weekends riding). To reset, hold the “OK” button whilst Trip A is displayed on the screen.
Trip A time: Displays the ride time for Trip A. It is reset when Trip A is reset.
Trip B: Automatically resets with each battery cycle, therefore giving the distance travelled on the last battery charge. Use
this to compare how different ride styles affect range.
Range: Gives an estimate of the remaining distance available.
Note: Because Range is highly dependent on use, it is important to understand that this is an estimate based on the
battery usage up to that point. If the latter stages of a ride involve more uphill, or the rider is putting in less effort
the range will reduce, and can do so dramatically.
POWER MODES AND LIMITS
The DC-1 has several limiting features, both manual and automatic. These limits are used to change the characteristics of
the bike as well as protecting components from over use.
The P-7 will come with a dongle that adjusts the top speed and power output specific to the region/country you are riding it
in.
INSERTING REGION-SPECIFIC DONGLES (P-7 ONLY)
Inside the frame, underneath the DC-1 there is a 2-pin plug to connect the dongle to the system. It is recommended that
you remove the battery for easier access.
To Next Page
Loading...
