Stealth F-37 - Page 15

STEALTH ELECTRIC BIKES OWNER’S MANUAL
V 2.4 PAGE | 15
For the larger battery, connect the two battery cables to the Stealth P-7. They are distinctly different connections.
Again, carefully insert the battery into the frame. Pay close attention to the cables and ensure none are pinched or bent in
the process. Avoid installing the battery at an angle. It should fit snugly in the P-7 frame, if not please consult with your
nearest dealer.
More foam may be needed to ensure the
battery does not move inside the frame
Slide the battery straight into the frame and make sure it is pushed
all the way back to the back of the bike. Careful of cables.
Connect and insert
pin