Why Steamfast Iron won't turn on?
If your Steamfast Iron fails to heat up and steam, and the Power Indicator Light does not illuminate, first ensure the unit is properly plugged into an electrical outlet. If it's plugged in, check your Household Circuit Breaker or Ground Fault Interrupter; reset it or replace the fuse if necessary. If problems persist, consider contacting a licensed electrician.
What to do if Steamfast SF-680 Iron is on but not heating?
If your Steamfast Iron fails to heat up and steam, but the Power Indicator Light does illuminate, it could be due to several reasons. The Auto Shut-Off may have engaged. Also, the Water Reservoir might be empty, so refill it. If neither of these is the issue, the unit may be damaged or malfunctioning, in which case you should immediately stop using it.
What to do if Steamfast Power Tool unit fails to heat up and the power indicator light does not illuminate?
First, ensure the power cord is properly plugged into an electrical outlet. If it remains unlit, check your household circuit breaker or ground fault interrupter, and reset it if tripped. Alternatively, replace the fuse if it has blown.
Why Steamfast Power Tool unit heats up, but fails to steam?
There are several reasons why your Steamfast Power Tool might heat up but fail to produce steam. Auto Shut-Off might be engaged. Another possible reason is that the water tank is empty. If neither of these is the case, the unit may be damaged or malfunctioning.
General| Type | Steam Iron |
|---|---|
| Power | 1500 Watts |
| Steam Output | 30 grams per minute |
| Cord Length | 8 feet |
| Weight | 3.5 pounds |
| Voltage | 120 Volts |
| Auto Shut-off | Yes |
| Self-cleaning | Yes |
| Anti-drip | Yes |
To Next Page
