Why Steba Cooktop has no light after plugging it in?
If your Steba Cooktop doesn't light up after plugging it in, it could be due to a lack of power. Ensure the plug is correctly inserted. Also, check the fuse, as too many devices on one power cord can cause this issue.
What to do if Steba IK 65 Slim beeps but doesn't heat?
If your Steba Cooktop is emitting a signal tone but not heating, it could be due to the pot not being properly positioned or not being suitable for induction. Ensure the pot is in the middle of the plate and has a minimum diameter of 12cm. Also, verify that you are using cookware that is compatible with induction cooktops.
What does error code E1 mean on a Steba IK 65 Slim Cooktop?
Error code E1 on your Steba Cooktop indicates that there is no cookware or the cookware being used is inappropriate. Check your cookware. If the issue persists, let the device cool down and then restart it.
What does error code E2 mean on a Steba IK 65 Slim?
Error code E2 on your Steba Cooktop suggests an internal overheat. Check the cookware. If the issue persists, let the device cool down and then restart it.
What does error code E7 mean on a Steba IK 65 Slim?
Error code E7 on your Steba Cooktop indicates the top plate is overheating. Check the cookware. If the issue persists, let the device cool down and then restart it.
What does error code E0 mean on a Steba IK 65 Slim Cooktop?
Error code E0 on your Steba Cooktop indicates an internal electronic error. Contact service.
What does error code E3 mean on a Steba Cooktop?
Error code E3 on your Steba Cooktop indicates over-voltage. Contact service.
What does error code E4 mean on a Steba IK 65 Slim?
Error code E4 on your Steba Cooktop indicates under-voltage. Contact service.
What does error code E5 mean on a Steba IK 65 Slim Cooktop?
Error code E5 on your Steba Cooktop indicates an error in the temperature sensor. Contact service.
What does error code E6 mean on a Steba IK 65 Slim Cooktop?
Error code E6 on your Steba Cooktop indicates an error in the IGBT sensor. Contact service.
General| Type | Induction Cooktop |
|---|---|
| Number of Cooking Zones | 2 |
| Power Levels | 9 |
| Temperature Range | 60 - 240 °C |
| Timer | Yes |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Timer Duration | 180 min |
| Control | Touch Control |
| Safety Features | Child Lock, Overheat Protection |
| Surface Material | Ceramic Glass |
To Next Page
