Steba IK 55 - User Manual

Questions and Answers

B
blangSep 4, 2025
Why does my Steba Hob make a signal tone but not heat?
- K
  Kimberly BellSep 4, 2025
  If your Steba Hob is emitting a signal tone but not heating, the issue is likely with the cookware. The pot you're using might not be suitable for induction cooking. Try using cookware that is compatible with induction.
M
Mr. James DavisSep 18, 2025
What does error code 'E6' mean on my Steba Hob?
- C
  Chelsea AndrewsSep 18, 2025
  If the Steba Hob displays error code 'E6', it indicates a short circuit in the electronics. Contact service.
M
Michael HahnSep 16, 2025
What does error code 'E5' mean on my Steba Hob?
- W
  wilsonmarioSep 16, 2025
  If the Steba Hob displays error code 'E5', it indicates a short circuit in the cooking plate. Contact service.
A
Alan LevySep 14, 2025
What does error code 'E4' mean on my Steba Hob?
- C
  Chad BriggsSep 14, 2025
  If the Steba Hob displays error code 'E4', it indicates an under-voltage issue. Contact service.
S
Sophia JensenSep 13, 2025
What does error code 'E3' mean on my Steba Hob?
- F
  frankfowlerSep 13, 2025
  If the Steba Hob displays error code 'E3', it indicates an over-voltage issue. Contact service.
T
Todd HamptonSep 12, 2025
What does error code 'E0' mean on my Steba Hob?
- J
  Jesus CampbellSep 12, 2025
  If the Steba Hob displays error code 'E0', it indicates an error in the circuit. Contact service.
E
Evan LawrenceSep 9, 2025
What does error code 'E7' mean on my Steba Hob?
- A
  Aaron SnyderSep 9, 2025
  If the Steba Hob displays error code 'E7', it means the top plate is overheating. Allow the device to cool down completely, then restart it.
E
erin90Sep 7, 2025
What does error code 'E1' mean on my Steba Hob?
- S
  Suzanne JohnsonSep 7, 2025
  If the Steba Hob displays error code 'E1', the pot you are using is not suitable for induction. Use suitable cookware.
S
sarahmurraySep 5, 2025
What to do if Steba Hob shows error code 'E2'?
- J
  Jermaine JonesSep 5, 2025
  If the Steba Hob displays error code 'E2', it indicates that the device is overheating. Remove the pot from the hob and allow the unit to cool down completely before restarting it.
C
cestradaAug 21, 2025
What to do if Steba IK 55 shows error code E2?
- E
  ejohnsonAug 21, 2025
  If the Steba Cooktop displays error code E2, it indicates the device is overheating. Remove the pot from the cooktop, allow it to cool down completely, and then restart the device.

Steba IK 55 Specifications

General

Type	Induction Cooktop
Number of Cooking Zones	2
Power Levels	9
Control Type	Touch Control
Safety Features	Overheating Protection, Automatic Shut-off
Colour	Black
Temperature Range	60 - 240 °C
Voltage	230 V
Frequency	50/60 Hz
Material	Glass Ceramic
Timer	Yes