17
Temperature
∙ Press the menu button again. The LED for the temperature is shining.
∙ The device starts with a default temperature of 60°C.
∙ The temperature can be changed with the control dial from 60 to 240°C. it can be
changed in the following steps:
o 60 – 120°C in steps of 5°C
o 120 – 180°C in steps of 10°C
o 180 – 240°C in steps of 20°C
∙ The device stops working and turns automatically into stand-by mode after 5 sec-
onds if the temperature 0 is chosen.
∙ Cooking with temperature levels is recommended for frying in a pan.
Timer
∙ Press the timer button, the LED lights up.
∙ The device starts with a default setting of 0:00 hours.
∙ The timer can be changed with the control dial:
o 0 – 2 hours in steps of 1 hour. Confirm with the timer button.
o 0 – 59 minutes for increases in steps of 5 minutes, for decreases ins teps of
1 minute (max. timer: 2:59h)
∙ Confirm with the timer button. The display shows the set temperature or power
level. In order to see the remaining time, press the timer button shortly.
∙ After the time run out, a signal sound can be heard and the device turns into stand-
by mode.
∙ If the timer should be turned off prematurely, turn the hours and minutes to 0 or
press the On/Of button
.
∙ In order to cool the electronic of the device, the ventilation runs for a couple
of minutes after the device has been turned off. Unplug once the ventila-
tion stopped.
∙ During operation the timer can be changed by pressing the timer button. The dis-
play shows the current time. this can be changed with the control dial within 5
seconds.
∙ Attention: if no timer is set, the device will be turned off for safety reasons after
2 hours.
Child lock
∙ Press the buttons . All buttons are locked. The chosen program continues. The
display shows “Loc”.
∙ In order to unlock, press
again for 3 seconds.
To Next Page
Loading...
