13
Child lock
∙ Press the button . All buttons, except on/off are locked.
∙ In order to unlock, press the button for some seconds.
Troubleshooting
Dear Client,
Thank you for buying this high-quality STEBA product. The following table will help
you with problems that may occur when using your device. For many problems there
is a simple solution, because not everything that appears like a malfunction must be
serious. Please check the following list before sending the complete device to the
customer service for inspection.
Problem Reason Solution
No light after plug-in of
the device
∙ No power
∙ To many devices at one
power cord
∙ Check is plug is
plugged-in correctly
∙ Check the fuse
A signal tone sounds and
no heat occurs
∙ Pot is not in the middle
of the plate
∙ Pot not suitable for
induction
∙ Min. diameter of 12cm
∙ Use suitable cookware
Plate does not heat any-
more
∙ Timer run out ∙ Set a new time
Error code „E0“ ∙ Internal electronic error ∙ Contact service
Error code „E1“ ∙ No or unapproriate
cookware
∙ Check cookware
∙ Let device cool down
and restart
Error code „E2“ ∙ Internal overheat ∙ Check cookware
∙ Let device cool down
and restart
Error code „E3“ ∙ Over-voltage ∙ Contact service
Error code „E4“ ∙ Under-voltage ∙ Contact service
Error code „E5“ ∙ Error in the tempera-
ture sensor
∙ Contact service
Error code „E6“ ∙ Error in the IGBT sensor ∙ Contact service
Error code „E7“ ∙ Top plate overheat ∙ Check cookware
∙ Let device cool down
and restart
To Next Page
