What to do if my Steba Air Cleaner light is on but no mist?
If the Steba Air Cleaner's light is on but there's no mist, it's likely due to one of two reasons. First, the water tank might be empty, so you should fill it with water. Second, the water tank might not be correctly attached; ensure it's properly connected.
How to fix Steba Air Cleaner when the power light is not working?
If the power light on your Steba Air Cleaner isn't working, make sure the unit is properly plugged into a power outlet and that you've pressed the power button to turn it on.
Why does my Steba Air Cleaner smell?
If your Steba Air Cleaner is emitting an unpleasant smell, the cause is likely dirty or old water. To resolve this, thoroughly clean the tank and the base of the unit. After cleaning, allow the components to air dry for at least 2 hours before reassembling and using the air cleaner.
What to do if Steba Air Cleaner light is on, but the appliance doesn't work?
If the light is on but your Steba Air Cleaner isn't working, there might be too much water in the tank. Secure the tank lid and remove some water from the basin to resolve this issue.
How to increase mist level on Steba Air Cleaner?
A low mist level in your Steba Air Cleaner is often caused by scale buildup on the membrane. Clean the membrane and refill the tank with fresh water to improve mist output.
Children aged 8+ can use with supervision. Children under 8 must be kept away. Cleaning by children requires supervision.
Unplug after use/malfunction. Do not leave unattended. Do not immerse. Switch off when empty. Contact service for abnormal smell.
Remove water from base/tank. Wipe scale from base, transductor, tank. Use scale remover or vinegar for excessive scale.
Clean ultrasonic membrane with a brush. Clean filter by soaking in salty water and rinsing.
Adjust atomization power in 3 levels. The device starts with medium. Explains relative humidity and temperature correlation.
Lists common failures like no power, no mist, smell, or low mist, with possible reasons and solutions.
Device for household use only. Covers manufacturing defects reported within warranty period.
General| Model | LB 10 |
|---|---|
| Noise level | 25 - 50 dB |
| Product Type | Air Purifier |
| Filtration technology | HEPA filter |
| CADR | 210 m³/h |
| Coverage Area | 35 m² |
| Air Flow Rate | 210 m³/h |
To Next Page
