What to do if my Steba LR 12 does not work?
If your Steba Air Cleaner isn't working, there are a couple of things to check: * First, make sure the device is properly plugged into a working outlet. Check the fuse. * Also, verify that the device is turned on.
Why is the air flow rate low in my Steba Air Cleaner?
If the airflow rate of your Steba Air Cleaner is low, it could be due to a couple of reasons: * The filter may need cleaning or replacement. Clean or replace the filter. * The air intake might be blocked. Ensure that the air intake is free from any dirt or obstructions.
How to get rid of odours from Steba Air Cleaner?
If you notice odours coming from your Steba Air Cleaner, the filter is likely soiled. Try cleaning or replacing the filter to resolve this issue.
What to do if my Steba LR 12 Air Cleaner is making noises?
If your Steba Air Cleaner is making unusual noises, consider the following: 1. Check for any obstacles in the ventilation area and remove them. 2. Ensure the device is placed on an even surface.
Why is air not filtered in Steba Air Cleaner?
If the air is not being filtered properly by your Steba Air Cleaner, the fine dust sensor may be dirty. Clean the sensor to ensure proper functioning.
General| Model | LR 12 |
|---|---|
| Type | Air Cleaner |
| Suitable for room size | Up to 25 m² |
| Filter type | HEPA filter |
| Activated carbon filter | Yes |
| Power consumption | 35 W |
| Coverage Area | 25 m² |
To Next Page
