EasyManua.ls Logo

Steba LB 10 - Operation and Controls; Ultrasound Atomization Adjustment

Steba LB 10
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
1 2 3
9 8 7 6 5
1) Room temperature
2) Humidity
3) Ionization
4) Ultrasound
5) Water level
6) Water preheating
7) Sleeping mode
8) Humidity
9) Timer
Connect the plug with the mains socket. A beep sound is heard, and the display
shows the current room temperature and humidity.
ON/OFF
BY touching the button the display shows By pressing the button again
the device turns off again.
Ultrasound
By pressing the button you can adjust the atomization power in 3 levels.
Your air humidifier always starts with the medium program
The percentage of water mist in a room and the air temperature are together the
relative humidity. The correlation between mist and air is varying at the different
temperatures. The higher the temperature is, the less water mist can be in the air.
In winter time the cold air comes from the outside and gets warmer by the room
temperature. The relative humidity is getting lower. The humidity must be increa-
sed by a humidifier.
The relative humidity in a room should be: bedroom or living room: 45-60%
sickroom: 40-50%
library: 40-50%
4

Related product manuals