13
How to use
A) Vacuum nozzle (should not be covered by films)
B) Gasket
C) Sealing bar
D) Vacuum chamber
E) Release button
F) Rubber lid
1) Vacuuming & sealing – stop
2) Sealing
Making bags from rolls of film
∙ Determine the space required for the food
∙ For the lower and the head welding, add 8cm length.
∙ Place the front end of this tube of film against the black oval sealing lip, ensuring
that it is smooth and free of creases.
∙ Close the lid and press gently in the middle of the lid.
∙ Seal with the „Seal“ button. The unit stops automatically when the welding has
been done.
∙ Press the release button and remove the film bag.
∙ The sealing bar will be hot!
To Next Page
Loading...
