EasyManua.ls Logo

Steba WP 1 Plus - Before Using for the First Time; Operation

Steba WP 1 Plus
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Before using for the first time
Remove all packaging materials.
Clean the device with a damp cloth.
Take care to prevent water from running into the appliance.
When your appliance is new you may notice a slight smoking or
ordor. This is normal with any heating appliances and will not
recur. This does not affect the safety or your appliance.
Cleaning
Always switch off, unplug and allow to cool down before clea-
ning.
After cooling the device can be cleaned with a paper towel.
There is no need to disassemble the appliance for cleaning.
Never immerse appliance in water or any liquid. Do not place in
dishwasher.
Operation
The appliance is for warming of foods and dishes.
Plug the cord in a 220-240 volt AC outlet only.
Turn the temperature knob to your desired temperature. NOTE: Always preheat for
7 minutes.
After use, turn the Temperature knob to the “MIN“ position, un-plug the device.
Only use the provided cable to connect the plates.
Adjustment
max 120°C, heating up time 10 minutes
min 60°C, heating up time 4 minutes
If you need a larger surface please connect the second part with the basic part
Important: Don´t use the second part with an separate cable!
Guarantee
The guarantee conditions for this appliance are as defined in our „Instructions for
use“ in German.

Related product manuals