Need help?Do you have a question about the Steel City 35619 and is the answer not in the manual?
General| Brand | Steel City |
|---|---|
| Model | 35619 |
| Category | Saw |
| Language | English |
Detailed physical and shipping measurements of the table saw.
Technical specifications of the saw's motor, including horsepower and voltage.
Information on proper electrical plug and receptacle connections for safety.
Guidelines for selecting and using appropriate extension cords for the machine.
Steps for selecting the final location and ensuring the saw is level.
Instructions to remove the shipping brace for the motor.
Steps to install the motor cover onto the saw cabinet.
Guidance on attaching the table extension wings to the saw.
Instructions for installing the handwheels for blade height and tilt adjustments.
Steps for properly aligning and installing the blade guard.
Procedure for safely mounting the saw blade onto the arbor.
Procedure to ensure the blade guard assembly is correctly aligned.
How to adjust the table insert to be flush with the saw table.
Instructions on how to use and adjust the miter gauge.
Details on using the mechanisms to adjust blade height and tilt.
Information on the saw's thermally protected on/off switch.
How to check and align the saw blade with the table.
Steps to check and adjust the blade's positive stops.
Instructions for mounting external components like rails and the fence.
Essential checks to perform before operating the table saw.
Procedure for a safe initial test run of the machine.
Guidance on choosing the correct saw blade for different cutting tasks.
Instructions for performing cuts across the grain of wood.
Procedures for making cuts along the grain of wood.
Steps and safety precautions for performing dado cuts.
Guidance on lubricating moving parts for smooth operation.
Instructions for keeping the saw clean from dust and debris.
Steps involved in replacing the drive belts for the motor.
To Next Page
