44
PICTURE ADJUST
SCREEN ADJUST
TV SETTING
7. ENGINEER MODE
a. Under AV/TV/S-VIDEO/MP3, press MENU to enter engineering mode.
b. Under engineering mode, press VOL UP(SELECT UP) and VOL DOWN
(SELECT DOWN) to select setting item, then press MENU.
c. Press VOL UP(SELECT UP) and VOL DOWN(SELECT DOWN) to
select adjusted function which needs to be adjusted, then press MENU.
d. Press VOL UP(SELECT UP) and VOL DOWN(SELECT DOWN) to
choose setting value.
For NTSC system:
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
EXIT
H-POSITION
V-POSITION
EXIT
AUTO SEARCH
ADD/ERASE
FINE-TURE
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 32
0 ~ 16
-20 ~ +20
-16 ~ +16
RF SYSTEM
TV SYSTEM
EXIT
SOURCE
VIDEO SYSTEM
EXIT
ADD / ERASE
-31 ~ +31
AV / TV / S-VIDEO / MP3
AUTO / NTSC / PAL / SECAM
TV / CATV
(if TV SYSTEM=NTSC-US then
"TV / STD / HRC / IRC")
NTSC / NTSC-J / NTSC-US
SETUP
FACTORY DEFAULT
INFORMATION
EXIT
TFT-LCD SCREEN OPERATION FOR CT2
To Next Page
Loading...
