SteelFlex Treadmill User Manual

Always unplug this appliance from the electrical outlet immediately after using and before cleaning.

General warnings for appliance use, covering unattended operation, supervision, intended use, damaged cords, heat, and openings.

Warning to remove and store the control box, key, or safety pin out of children's reach when not in use.

Caution regarding risk of injury from moving belt, advising extreme care when stepping on/off.

Caution to reduce risk of injury from moving parts by unplugging before servicing.

Warning to reduce risk of electric shock by unplugging before cleaning or servicing.

Details the intended country of use and potential electrical supply differences, advising customer support consultation.

Specifies clearance requirements for unobstructed placement around the treadmill for safe operation.

Explains the necessity of proper grounding for shock/damage prevention and warns against using adapters.

Instructions on adjusting the rear legs using thumb-wheels for stable support.

Details the power switch, its function, and the circuit breaker for overload protection and reset.

Details the requirement for a grounded outlet and how to position the cord to avoid damage.

Introduces the display's components: information windows, matrix window, and button location for operating the unit.

Explains the information windows provide program directions and user data like TIME, HEART RATE, CALORIES, PACE, DISTANCE, AVG SPEED, INCLINE, and SPEED.

Describes the Matrix Window's display of workout programs, exercise profiles, and location via a flashing lamp bar.

Lists and describes buttons for machine operation, adjusting incline, and exercise speed.

Introduces different exercise programs: manual, set time, set calories, set distance, custom, walking, running, cardio, interval, fat burn, endurance, and HRC.

Step-by-step guide for using the Manual program, including setting weight and starting the workout.

Instructions for setting up TIME, CALORIES, or DISTANCE programs, including weight input and program selection.

Guide for using Custom Learn 1 and 2 programs, including setting weight, profile, and speed/incline.

Instructions for setting up WALKING, RUNNING, CARDIO, INTERVAL, FAT BURN, and ENDURANCE programs.

Steps for setting up Heart Rate Control (HRC) programs, including weight, age, and max heart rate.

Synopsis of the Manual program, detailing user input, manual control, and display track simulation.

Synopsis of the Time program, detailing user input, manual control, and display track simulation.

Synopsis of the Calories program, detailing user input, manual control, and display track simulation.

Synopsis of the Distance program, detailing user input, manual control, and display track simulation.

Details the speed and elevation profiles for the Walking program across three levels.

Details the speed and elevation profiles for the Running program across three levels.

Details the speed and elevation profiles for the Interval program across three levels.

Details the speed and elevation profiles for the Cardio program across three levels.

Details the speed and elevation profiles for the Fat Burn program across three levels.

Explains the display layout for PT10 & PT7, including information windows, matrix window, and button location.

Details the user workout data displayed: TIME, HEART RATE, CALORIES, INCLINE, DISTANCE, PACE, and SPEED.

Describes the Matrix Window's display of workout programs, exercise profiles, and location via a flashing lamp bar.

Lists and describes buttons for machine operation, adjusting incline, and exercise speed.

Explains the CLASSIC exercise programs: CARDIO, FAT BURN, and INTERVAL.

Explains Heart Rate Control (HRC) programs: TARGET, HILL, and INTERVAL.

Describes the MANUAL program for operation.

Explains GOAL exercise programs: TIME, DISTANCE, and CALORIES.

Explains TRAINING programs: GERKIN, USB, CUSTOM 1, CUSTOM 2, and CUSTOM 3.

Describes the REVERSE program where the belt runs backward (Only for PT10).

Instructions for switching between general (GEN) and Rehad/Geriatric (SIL) modes.

Step-by-step guide for using the Manual program on the Steelflex PT10.

Instructions for setting up and using the GOAL programs on the PT10.

Instructions for setting up and using the CLASSIC programs on the PT10: CARDIO, FAT BURN, INTERVAL.

Instructions for setting up and using the H.R.C. programs on the PT10: TARGET, HILL, INTERVAL.

Instructions for setting up and using the TRAINING programs on the PT10: GERKIN, USB, CUSTOM 1, CUSTOM 2, CUSTOM 3.

Instructions for the REVERSE program, including max speed and control limitations.

Lists common error codes (E1, E6, E7, USB ERR, USB DATA ERR) and their meanings.

Provides guidelines for cleaning the treadmill exterior, console, belt, and inspecting parts.

Outlines the terms, conditions, coverage, and limitations of the product warranty.