15
OPERATING INSTRUCTIONS
Press “ ” or “ ” to select TIME/
CALORIES/DISTANCE program, then
press“ ”.
SET TIME/SET CALORIES/SET DISTANCE
SET TIME/SET CALORIES/SET DISTANCE
ENTER
ENTER
step 1
step 2
step 3
Center Display counts down 3 seconds, and then starts belt.
During your workout, you can change speed and incline using
Quick Keys, corresponding arrow or “+” “-“ keys.
When Using Speed Quick keys, for any Increase in speed, user
Must press “ ” after selection before Speed will Increase.
Press “ ”, when asked in the scrolling display to enable
elevation / incline.
ENTER
Turn on the power press “ ” 、 “ ”
、 “ ” or “ ” to set your weight
and press“ ”. The default value is 176 LBS.
Use “ ” 、 “ ”、 “ ” or
“ ” to set time/calories/distance then
press “ ”.
START
To Next Page
Loading...
