14
OPERATING INSTRUCTIONS
MANUAL
Manual
Center Display counts down 3 seconds, and then starts belt.
During your workout, you can change speed and incline using
Quick Keys, corresponding arrow or “+” “-“ keys.
When Using Speed Quick keys, for any Increase in speed, user
Must press “ ” after selection before Speed will Increase.
Press “ ”, when asked in the scrolling display to enable
elevation / incline.
step 1
step 2
STARTSTART
Press “ ” .
Turn on the power and press “ ” 、
“ ”、 “ ” or “ ” to set
your weight and press “ ”. The default
value is 176 LBS.
ENTERENTER
ENTER
To Next Page
Loading...
