Steg MDSP10 - Remote Introduction

PRODUCTBRIEFINTRODUCTION
[ 9 ]
PRODUCTBRIEFINTRODUCTION
[ 10 ]
7. LP/SLOPE.
1.6dB/oct 12dB/oct 18dB/oct 24dB/oct 30dB/oct
36dB/oct. 42dB/oct 48dB/oct are available.
8. HP/SLOPE.
1.6dB/oct 12dB/oct 18dB/oct 24dB/oct 30dB/oct
36dB/oct.42dB/oct 48dB/oct are available.
10. WRITE.
To Write To Device(POS1-POS8).
9. Filter Model.
To choose different Filter type Linkwitz Bessel Butterworth.
12. X-OVER AND EQ CHARTS.
13. EQ SETTING.
1.Red lines and slopes will change accordingly when
2.EQ all frequency points can be move left or right.For 20Hz-20KHz can be any Regulation.
Q volue=1-12.
HP/LP of crossover and EQ are modified.
11. READ.
To Read From Device(POS1-POS8).
7.REMOTE INTRODUCTION
DSP