EasyManua.ls Logo

STEIN VIDA - Warranty and Preparation Information; Warranty Details; Health and Safety Precautions; Important Preparation Steps

Default Icon
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
WARRANTY
• This covers faulty product for 1 year. Check www.stein.co.nz for full details of
warranty.
• Any breakage on site will not be covered.
• The installation must conform to the instructions for the warranty to apply.
HEALTH & SAFETY
• Glass is heavy and requires two people to handle in most applications.
• Always stand glass up after unpacking the components and use soft packing when
in contact with hard surfaces. Take care not to strike an edge or corner on a hard
surface.
• All glass is toughened and cannot be reworked or drilled.
• Wear protective gloves and eye protection.
• Special care should be taken when drilling walls to avoid hidden pipes or electrical
cables.
IMPORTANT PREPARATION STEPS!
1. Solid xing must be provided in the walls behind the wall channels. 20mm centre
off outside of the Acrylic tray.
2. Plumbing ttings in the wall need suitable solid xings.
3. All plumbing must be completed by a registered plumber and be in place prior to
being lined.
4. The wall lining must be a “Wet Area” grade to meet the Building Code.
5. The oor must be level and at without deection. Walls must be plumb and
surfaces at.
6. The Acrylic Tray and Liner comes with its own specic instructions.
TOOLS REQUIRED (NOT SUPPLIED)
VIDA SHOWER UNIT SQUARE
WE RECOMMEND A TRADESMAN FAMILIAR WITH THIS TYPE OF INSTALLATION
MATERIALS REQUIRED (NOT SUPPLIED)
• Rags and suitable cleaning materials
• Sika Silaex NG Translucent