STEIN VIDA - User Manual

VIDA SQUARE SHOWER
UNIT
JAN 2020
IMPORTANT!
1. When you receive your Vida Square Shower package please check for any freight damage.
2. If damage has occurred advise your supplier within 8 hours.
3. Do not install any faulty product as this will invalidate later claims.

Summary

Warranty and Preparation Information

Warranty Details

Covers product warranty duration and conditions, including limitations.

Health and Safety Precautions

Outlines safety measures for handling glass and during installation.

Important Preparation Steps

Lists critical pre-installation requirements for walls, plumbing, and floor.

Required Tools

Lists the tools necessary for the installation process.

Required Materials

Lists the materials and consumables needed for installation.

Assembly Diagram and Parts

Assembly Diagram

Provides an exploded view illustrating component placement during assembly.

Parts List

Detailed list of all components with part numbers, descriptions, and quantities.

Layout Plan and Measurements

Layout Plan A

Diagram showing placement of wall channels relative to the shower tray edge.

Minimum and Maximum Measurements

Specifies dimensional ranges for fitting the shower, considering wall plumbness.

Installation Guide

Step 5: Install Door Set and Return Panels

Instructions for fitting the main door and return panels into wall channels.

Step 6: Join Panels at Corner

Procedure for connecting the two main shower panels at the corner.

Step 7: Fasten Outside Corner and Square Up

Securing the frame and ensuring the shower screen is square and plumb.

Step 8: Fit Door Parts

Instructions for attaching specific door components like handles and seals.

Step 9: Fit Back Door Seal and Adjustments

Attaching the rear door seal and making final adjustments to the door.

Step 10: Apply Silicone Sealant

Instructions for applying silicone sealant around the outside to prevent leaks.

Contact Information

Stein Contact Details

Provides phone numbers, email address, and website for customer inquiries.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document outlines the installation and maintenance of the STEIN VIDA SQUARE SHOWER UNIT, a two-sided shower enclosure designed for residential use. The manual provides comprehensive instructions, from initial preparation to final sealing, ensuring a proper and durable installation.

Function Description:

The STEIN VIDA SQUARE SHOWER UNIT is a complete shower enclosure system, comprising a door panel, a return panel, and associated hardware. It is designed to create a sealed showering area within a bathroom, preventing water from escaping into the surrounding space. The unit features a pivot door mechanism, allowing for easy entry and exit. The design emphasizes a clean, modern aesthetic, with clear glass panels and minimalist framing. The system is intended to be installed in conjunction with an acrylic tray and wall lining, which are not included in this package but are essential for a complete and functional shower. The unit's construction and sealing method are specifically designed to allow any water that might accumulate within the wall channels to drain back into the shower area, preventing potential leaks and maintaining the integrity of the surrounding bathroom structure.

Important Technical Specifications:

• Door Panel (6): 1725mm (height) x 780mm (width) x 6mm (thickness). Made of toughened glass.
• Return Panel (8): 1830mm (height) x 822mm (width) x 5mm (thickness). Made of toughened glass.
• Wall Channel (2): 1830mm (length). Two pieces are supplied.
• Wall Plug (Concrete) (1): 6x30mm. 8 pieces supplied.
• Wall Channel Screws (3): ST3.5x35mm. 8 pieces supplied.
• Frame to Wall Channel Screws (5): ST4x10mm. 9 pieces supplied.
• Door Bottom Seal (9): 780mm (length). 1 piece supplied.
• Back Door Seal (10): 1760mm (length). 1 piece supplied.
• Pivots Top and Bottom (11): 2 pieces supplied.
• Pivot Screw Cap (12): 2 pieces supplied.
• Minimum/Maximum Dimensions for 900x900 Square (2 Sided):
  • Front Panel (A) MIN/MAX: 870mm to 890mm
  • Return Panel (B) MIN/MAX: 870mm to 890mm
• Required Tools (Not Supplied): Drill (Ø6mm, Ø3.2mm bits), hammer, screwdriver, measuring tape, spirit level, sealant gun, utility knife.
• Required Materials (Not Supplied): Rags, suitable cleaning materials, Sika Silaflex NG Translucent sealant.
• Warranty: 1 year against faulty product. Breakage on site is not covered. Installation must conform to instructions for warranty to apply.

Usage Features:

The shower unit is designed for ease of use and durability. The toughened glass panels provide safety and a clear view, enhancing the showering experience. The pivot door mechanism allows for smooth operation. The design prioritizes water containment within the shower area, with specific instructions for external silicone sealing to ensure any internal moisture drains back into the tray. This design choice is critical for preventing water damage to the surrounding bathroom structure and is a key aspect of the product's warranty. The unit is suitable for a 900x900mm square shower space, offering a practical solution for various bathroom layouts.

Maintenance Features:

Maintenance of the STEIN VIDA SQUARE SHOWER UNIT primarily involves proper installation and regular cleaning.

• Installation: Crucial for long-term performance. The manual emphasizes checking for freight damage upon receipt and advising the supplier within 8 hours if any is found. Faulty products should not be installed as this invalidates later claims. Solid fixing in walls for wall channels (20mm centre off outside of the acrylic tray) and plumbing fittings is essential. All plumbing must be completed by a registered plumber and in place before lining. The wall lining must be "Wet Area" grade, and the floor must be level, flat, and without deflection, with walls plumb and surfaces flat.
• Sealing: A continuous 7mm bead of silicone must be applied to the back of the wall channels before fastening them to the wall, ensuring they remain plumb. Crucially, silicone sealant is applied only around the outside of the shower screen. Sealing the inside of the shower screen will void the warranty, as the design allows water to return into the shower area if it accumulates within the wall channel. A 24-hour drying period for the silicone is required before use. Additionally, the join between the wall profile and frame should be sealed 150mm up from the base on both sides.
• Cleaning: Regular cleaning with rags and suitable cleaning materials is recommended to maintain the appearance and hygiene of the shower unit. The use of Sika Silaflex NG Translucent sealant is specified for installation, indicating a preference for a durable and appropriate sealant for wet environments.
• Health & Safety: Glass is heavy and requires two people to handle. Always stand glass up after unpacking and use soft packing when in contact with hard surfaces. Avoid striking edges or corners on hard surfaces. Wear protective gloves and eye protection. Exercise special care when drilling walls to avoid hidden pipes or electrical cables.

STEIN VIDA Specifications

General

Brand	STEIN
Model	VIDA
Category	Bathroom Fixtures
Language	English