7
CONTACT
Freephone: 0800 002 299 Phone: 07 928 9990 Fax: 07 928 9999
Email: info@stein.co.nz www.stein.co.nz
INSTALLATION
10
Apply Silicone Sealant around the outside as shown.
Silicone is not used on the inside of the
shower screen because water can build
up over time within the wall channel and
leak out of the shower area. The screen
is designed to allow the water to return
into the shower area, if any is present.
SCREENS THAT ARE SEALED ON THE
INSIDE WILL VOID WARRANTY.
!
ALLOW 24 HOURS FOR SILICONE TO FULLY DRY
BEFORE USE.
!
S ilic o
ne
Si lic one
Seal the join between wall profile and frame.
150mm up from base on both sides.
S ilico
ne
Si lico ne
To Previous Page
Loading...