Steinbach BP-39WS-B Mini - Page 44

WARNING!
Risk of re and explosion through leaking nned heat exchanger!
The coolant circuit of the nned heat exchanger contains highly
pressurised, easily ammable, odourless gas. Risk of re and
explosion in the event of uncontrolled coolant leaks.
-
Keep the heat pump away from heat sources and naked ames.
- Do not drill into or scorch the heat pump.
-
Do not use any objects apart from those permied by the
manufacturer to speed up the defrosng process.
-
Immediately shut o the heat pump if you suspect a coolant leak.
- The coolant is odourless. Always keep ignion sources away from
the installaon site of the heat pump.
-
Contact an authorised expert if you suspect a coolant leak.
- Observe the naonal regulaons on gas.
- All persons involved in work on the refrigerant circuit must have a
valid cercate from an industry accredited cercaon body
that ensures competence in handling refrigerants according to a
specic assessment recognized by industry associaons.
- Take precauons so that the device cannot be damaged while in
storage.
- Store the device in a well venlated locaon where the room size
corresponds to the room area specied for operaon.
WARNING!
Risk of injury due to inadequate qualicaons!
Lack of experience or skill in handling the required tools and lack of
knowledge of regional or normave regulaons for the necessary
manual work can result in serious injuries or material damage.
- Engage a qualied specialist for all work for which you are unable
to assess the risks due to inadequate personal experience.
44