Steinbach BP-39WS-B Mini - Page 45

WARNING!
Risk of electric shock!
Faulty electric installaon or excess mains voltage can cause an
electric shock.
-
Have the installaon, inial start-up and maintenance of the heat
pump carried out by authorized specialists only.
- Do not start work on the heat pump before all safety instrucons
have been complied with.
- Work on the heat pump may only be carried out when it is de-
energized.
- Only connect the heat pump if the mains voltage of the socket
matches that on the type plate.
-
Only connect the heat pump to an easily accessible socket so that
you can quickly disconnect the heat pump in the event of a fault.
- Do not operate the heat pump if there is visible damage or if the
power cable or power plug is defecve.
-
If the power cable of the heat pump is damaged, it must be
replaced by the manufacturer, its customer service or a qualied
person to prevent hazards.
- Do not open the housing. Let specialists perform any repairs. All
liability and warranty claims will be void in the case of arbitrary
repairs, improper connecon or wrong operaon.
-
Only parts that match the original device data may be used for
repairs. This heat pump contains electrical and mechanical parts
that are essenal for protecon against sources of danger.
- Do not operate the heat pump with an external mer or a
separate remote control system.
- Do not immerse the heat pump, power cable or power plug in
water or other liquids.
- Never touch the power plug with wet hands.
45
en