To Next PageTo Next PageWhat to do if Steinbach Poolrunner S63 does not function?
If your Steinbach Swimming Pool Vacuum isn't working, it could be due to a few reasons. First, check the plug connection of the power cable and the control unit to ensure it is completely plugged in. Also, if there is too much air in the housing, switch off the device and let all the air escape.
Why Steinbach Poolrunner S63 cable is twisted?
The cable of your Steinbach Swimming Pool Vacuum might be twisting because the device turns in the water during cleaning, which is normal. Another reason may be obstacles in the pool or the cable in the water is too long. To resolve this, switch off the device, disconnect the cable and untangle it. Remove any obstacles from the pool. Pull the excess cable length out of the water, ensuring only enough cable is in the water for the device to reach all spots in the pool.
General| Brand | Steinbach |
|---|---|
| Model | Poolrunner S63 |
| Category | Swimming Pool Vacuum |
| Language | English |
