What to do if my Steinbach Poolrunner Battery+ won't turn on?
If the device cannot be switched on and the status indicator is not lit, it could be that the rechargeable battery is drained, so charge the rechargeable battery. If that doesn't work, the rechargeable battery might be defective.
What does it mean when my Steinbach Poolrunner Battery+ blinks red?
If the device does not work and the status indicator blinks red, the device has a fault.
Why does my Steinbach Swimming Pool Vacuum battery die so fast?
If the rechargeable battery run time of your Steinbach Swimming Pool Vacuum is shorter than expected, it could be due to a couple of reasons. The water temperature might be too low; only use the device under the permissible operating conditions. Also, the rechargeable battery might not have been completely charged; ensure you charge it fully.
Why is the Steinbach Poolrunner Battery+ Swimming Pool Vacuum battery life so short?
There are several reasons why the runtime of the rechargeable battery might be shorter than expected. The water circulation of the pool might be switched on, so switch off the filter system. The water temperature could be too low, so only use the device under permissible operating conditions. The rechargeable battery may not have been completely charged, so charge it fully. Finally, the pool floor might not be level, so only use the device in pools with a level floor.
How to improve the coverage of my Steinbach Swimming Pool Vacuum?
If your device isn't reaching all spots, it might be due to the nozzle setting not being suitable, so change the setting of the nozzles. Also, if the water circulation of the pool is switched on, switch off the filter system of the pool.
Why is my Steinbach Poolrunner Battery+ blinking blue and not working?
If the device does not work and the status indicator blinks blue, the pump is likely running dry. Wait until the device is in the water before switching it on.
Why does my Steinbach Swimming Pool Vacuum float or turn in circles?
If the device floats up or turns in a circle on the bottom of the pool, it might be due to too much air in the housing, so let all air escape. Alternatively, the salt content could be too high, increasing buoyancy, so set the correct salt content.
Why isn't the charge control indicator lighting up on my Steinbach Poolrunner Battery+?
If the charge control indicator is not lit, the charger might be defective.
Why can't my Steinbach Swimming Pool Vacuum reach all spots?
Your Steinbach Swimming Pool Vacuum might not be reaching all spots because the nozzle setting isn't suitable. Try changing the setting of the nozzles. Also, the water circulation of the pool might be switched on; switch off the filter system of the pool.
What to do if my Steinbach Swimming Pool Vacuum won't switch on but the status indicator is lit?
If your Steinbach Swimming Pool Vacuum won't switch on and the status indicator is lit, the rechargeable battery may be dead. Charge the rechargeable battery.
Lists all included components of the pool cleaner.
Specifies the device is for private pools and not commercial use.
Details the meaning of symbols used in the manual and on the device.
Defines the meaning of WARNING, CAUTION, and NOTICE signal words.
Provides essential safety guidelines for using the device.
Details precautions for children and individuals with reduced physical or mental capacities.
Provides specific safety guidelines for using and handling the device charger.
Highlights risks associated with packaging materials like suffocation.
Outlines steps for verifying delivery completeness and checking for damage.
Details the procedure for charging the device's battery.
Explains the meaning of status indicator lights (blue, red) during operation.
Provides step-by-step instructions for charging the device's battery.
Offers recommendations for setting nozzle angles for optimal cleaning.
Explains how to attach the floating handle for controlled placement.
Provides instructions on how to attach the brush for enhanced cleaning.
Details the procedure for detaching the brush from the device.
Lists checks to perform before each use of the device.
Outlines the steps and considerations for cleaning the pool.
Details how to insert the filter unit into the bottom part.
Explains how to place the device in the pool and start the cleaning process.
Describes device status lights and the procedure for switching it off.
Provides instructions for cleaning the pool cleaner after use.
Details how to properly store the device and its accessories.
Lists common faults and their corresponding solutions or remedies.
Lists technical specifications for the pool cleaner, including battery and performance.
Details the technical specifications of the device charger.
Diagram showing numbered spare parts for the pool cleaner.
Lists all available spare parts with their corresponding part numbers and descriptions.
Provides guidance on how to sort and dispose of the product packaging.
Explains the legal obligation and method for disposing of used appliances.
General| Battery Type | Lithium-ion |
|---|---|
| Run Time | Up to 90 minutes |
| Charging Time | 5-6 hours |
| Filter Type | Fine mesh filter |
| Weight | 6.5 kg |
| Warranty | 2 years |
| Type | Robotic |
| Pool Type | Above Ground and In-Ground |
| Cleaning Coverage | Floor |
| Cleaning Technology | Brushes |
To Next Page
