Steinbach Poolrunner Battery+ - Charging Procedure; Adjusting the Nozzles

2. Take the protecve cap
1
o the
charging plug
12
.
3. Connect the charger to the device.
4. Plug the charger into a socket.
The charge control indicator is lit red.
The rechargeable baery is charging.
5. When the control LED is lit green,
disconnect the charger from the power
supply and the device.
6. Aach the protecve cap
1
to the
charging plug
12
.
The rechargeable baery is charged.
Adjusting the nozzles
The following sengs are recommendaons. Adapt the basic sengs to the actual
properes of your pool.
1
1
12
2
matching connectors (groove direction),
vertically aligned, same view direction
3
1
12
35