Steinbach Poolrunner Battery+ - Storage Instructions; Troubleshooting; Fault Description and Remedies

2. Take the lter unit
3
out of the boom
part
4
.
3. Thoroughly rinse the lter unit
3
with
plain tap water.
4. Rinse the device aer each use with
plain tap water inside and out.
The device is clean.
Storage
1. Thoroughly clean the device (see secon "Cleaning").
2. Let all parts dry completely.
3. Fully charge the device.
Recharging is required aer at latest 3 months due to self-discharge.
4. Then store the device and its accessories in a dry and frost-free place (≥ +5 °C)
without direct sunlight.
Troubleshooting
Fault
descripon Cause Remedy
The device cannot be switched
on and the status indicator is
not lit.
The rechargeable baery is
drained.
Charge the rechargeable
baery.
The rechargeable baery is
defecve.
Contact customer service.
The charge control indicator is
not lit.
The charger is defecve. Contact customer service.
The device does not work and
the status indicator blinks red.
The device has a fault. Contact customer service.
16
3
4
17
3
42