To Next PageTo Next PageWhat to do if my Steinbach Swimming Pool Vacuum does not function?
If your Steinbach Swimming Pool Vacuum isn't functioning, first check the plug connection of the power cable and the control unit to ensure it is completely plugged in. If the control unit requires a different voltage than the local one, contact customer service. Also, too much air in the housing could be the problem; switch off the device and let all the air escape.
How to untangle the cable of my Steinbach Poolrunner HJ1009 Swimming Pool Vacuum?
If the cable of your Steinbach Swimming Pool Vacuum is twisted or tangled, it could be due to a few reasons. The device might be turning in the water during cleaning, which is normal. However, you can switch off the device, disconnect the cable, and untangle it. Also, check for any obstacles in the pool and remove them. If the cable in the water is too long, pull the excess length out, ensuring it's just enough for the device to reach all spots in the pool.
Why my Steinbach Poolrunner HJ1009 cannot reach all spots in the pool?
If your Steinbach Swimming Pool Vacuum isn't reaching all spots, it could be due to an unsuitable nozzle setting. Try changing the setting of the nozzles. Another reason might be that the cable is too short; ensure a sufficient length of cable is in the pool, observing the minimum distance of the control unit to the pool. Also, the water circulation of the pool could be interfering, so switch off the filter system.
Why does my Steinbach Poolrunner HJ1009 float or turn in circles?
If your Steinbach Swimming Pool Vacuum floats or turns in a circle on the pool floor, it might be due to too much air in the housing. Let all the air escape. Another reason could be that the salt content is too high, increasing buoyancy. Ensure you set the correct salt content, referring to the "Technical data" section for guidance.
How to improve cleaning performance of my Steinbach Swimming Pool Vacuum?
If your Steinbach Swimming Pool Vacuum isn't cleaning optimally and is swirling up dirt, it might not be cleaning sufficiently. Try changing the setting of the nozzles to reduce the speed.
What to do if my Steinbach Poolrunner HJ1009 Swimming Pool Vacuum does not sink?
If your Steinbach Swimming Pool Vacuum doesn't sink, it's likely due to air trapped inside the device. Switch off the device and let all the air escape.
Why my Steinbach Poolrunner HJ1009 Swimming Pool Vacuum does not turn around?
If your Steinbach Swimming Pool Vacuum isn't turning around, the filter unit might be full. Clean the filter unit.
Lists the physical parts of the pool cleaner.
Details the meaning of symbols used in the manual and on the device.
Provides essential safety precautions for operating the pool cleaner.
Explains the automatic cleaning function and components like cable and filter.
Details the power adapter and indicator lights on the control unit.
Guidance on adjusting nozzles for different pool conditions.
Instructions on how to adjust the device's nozzles for optimal pool cleaning.
Steps for attaching the optional brush to improve cleaning performance.
Critical safety warning regarding pool usage during operation.
Warning about potential electric shock if the control unit falls into the pool.
Step-by-step guide on how to properly insert the filter unit into the device.
Instructions for connecting the control unit to the device and power supply.
Guidelines for environmentally friendly disposal of packaging materials.
Instructions for proper disposal of the pool cleaner at its end of life.
General| Brand | Steinbach |
|---|---|
| Model | Poolrunner HJ1009 |
| Category | Swimming Pool Vacuum |
| Language | English |
