To Next PageTo Next Page
Need help?Do you have a question about the Steinberg Systems SBS-BW-3T/1KG and is the answer not in the manual?
General| Brand | Steinberg Systems |
|---|---|
| Model | SBS-BW-3T/1KG |
| Category | Scales |
| Language | English |
Key safety guidelines and operational advice for platform scales, including overload protection and maintenance.
Explains battery level indicators, charging status, and low voltage warnings for the platform.
Describes the "NO" status on the display, indicating a circuit fault requiring repair.
Details the procedure for turning the scale on, the self-test sequence, and initial display readings.
Explains wireless connection status lights and the "Err24" error for platform communication issues.
Instructions on when and how to use the TARE/ZERO function to zero the scale or exclude container weight.
How to activate and deactivate the HOLD function to freeze the displayed weight.
Explains how to switch between different weight units like kg and lb.
Details the "PACK" function settings (IN, OUT, NO) for alarms and limit checks.
Lists and explains common error messages like "Ad Err", "Lo bat", "OL Overload", and "Seterra".
Guides on using buttons to input specific upper and lower weight limits for the pack function.
Explains how the scale alarms behave based on the IN, OUT, or NO settings for weight limits.
Instructions for setting the 'OUT' mode to alert for weights exceeding the upper or falling below the lower limit.
Procedure to set the average weight of a sample for accurate parts counting.
How to place parts on the scale to get the total count after setting the sample weight.
