To Next PageTo Next Page
Need help?Do you have a question about the Steinberg Systems SBS-BW-5T and is the answer not in the manual?
General| Model | SBS-BW-5T |
|---|---|
| Category | Scales |
| Readability | 0.5 kg |
| Units | kg, lb |
| Power supply | Built-in rechargeable battery |
| Platform material | Stainless steel |
| Display | LED |
| Material | Stainless steel |
| Capacity | 5000 kg |
| Calibration | External calibration |
| Weighing range | 0 - 5000 kg |
| Operating time | Approx. 100 hours (with batteries) |
General safety advice and operational notes for electronic scales to ensure longevity and good results.
Overview of technical specifications for different platform scale models, including range and dimensions.
Information on battery level, charging status (AC LED), and low voltage warnings.
Explains display status "NO" and common error codes like "Ad Err", "Lo bat", "OL", "Seterra".
Guide to turning the scale on/off, self-test sequence, and initial setup.
Instructions on using the TARE/ZERO button for accurate weighing and avoiding errors.
How to activate the HOLD function and change measurement units (kg/lb).
Setting up the PACK function for upper and lower weight limit alarms.
Procedure for setting upper and lower limits for alarm functions (IN and OUT modes).
How to set up and use the parts counting feature by entering sample weight.
Step-by-step guide to calibrate the scale using known weights.
Information on the proper disposal of electronic waste according to European regulations.
Details for contacting the manufacturer or distributor for support and inquiries.
