STEINEL IS 140-2 Z-Wave - User Manual

RUS CN BG LV LT EST HR SLO RO PL SK CZ H TR GR N FIN DK S P E I NL F GB D
IS 140-2 Z-Wave
Information
000000000 07/2013 Technische Änderungen vorbehalten.
STL-7329-16_BDAL_z-WAVE_A5.indd 4 01.12.16 10:27
STEINEL Vertrieb GmbH
Dieselstraße 80-84
33442 Herzebrock-Clarholz
Tel: +49/5245/448-188
www.steinel.de
Contact
www.steinel.de/contact
DEGBFRNLIT
11005909703/2019_ATechnische Änderungen vorbehalten. / Subject to technical modification without notice.

Summary

IS 140-2 Z-Wave Overview

Proper Use

Reach

Electrical Installation

Switch Off Power Supply

Instruction to disconnect power before starting installation for safety.

Connecting the Mains Supply Lead

Details how to connect the 3-core mains lead (L, N, PE).

Connection Diagram

Mounting the Sensor

Check Components and Select Location

Mounting Procedure

Step-by-step instructions for physically installing the sensor.

Z-Wave Integration

Inclusion into Z-Wave Network

Instructions for adding the device to a Z-Wave network.

Exclusion from Z-Wave Network

Instructions for removing the device from a Z-Wave network.

Smart Friends System Integration

Specific steps to integrate the device with the Smart Friends app.

Setting via App

Reset to Factory Settings

Troubleshooting

Device Power and Connectivity Issues

Addresses malfunctions related to power, short circuits, and Z-Wave addition.

Detection and Switching Malfunctions

Covers issues like not switching on, not switching off, and continuous switching.

False Activation Causes

Status LED Error Codes

Interprets status LED flashing patterns to diagnose faults.

STEINEL IS 140-2 Z-Wave Specifications