STEINEL IS 140-2 Z-Wave User Manual

- 21 -- 20 -
8. Operation/maintenance
Weather conditions may aect the
way the motion detector works.
Strong gusts of wind, snow, rain or
hail may cause the light to come
ON when it is not wanted because
the sensor is unable to distinguish
between sudden changes of tem-
perature and sources of heat. The
detector lens may be cleaned with a
damp cloth if it gets dirty (do not use
cleaning agents).
9. EC Declaration of
Conformity
Hereby, STEINEL Vertrieb GmbH
declares that the radio equipment
type IS140-2Z-Wave is in com-
pliance with Directive 2014/53/EU.
The full text of the EU declaration of
conformity is available at the following
internet address: www.steinel.de
10. Disposal
Electrical and electronic equipment,
accessories and packaging must
be recycled in an environmentally
compatible manner.
Do not dispose of electrical
and electronic equipment as
domestic waste.
EU countries only:
Under the current European Directive
on Waste Electrical and Electronic
Equipment and its implementation in
national law, electrical and electronic
equipment no longer suitable for
use must be collected separately
and recycled in an environmentally
compatible manner.
11. Manufacturer’s Warranty
This STEINEL product has been
manufactured with utmost care,
tested for proper operation and
safety and then subjected to random
sample inspection. Steinel guarantees
that it is in perfect condition and
proper working order. The warranty
period is 36 months and starts on
the date of sale to the consumer.
We will remedy defects caused by
material flaws or manufacturing faults.
The warranty will be met by repair or
replacement of defective parts at our
own discretion. The warranty shall not
cover damage to wear parts, damage
or defects caused by improper
treatment or maintenance. Further
consequential damage to other
objects shall be excluded.
Claims under the warranty will only
be accepted if the unit is sent fully
assembled and well-packed with a
brief description of the fault, a receipt
or invoice (date of purchase and
dealer's stamp) to the appropriate
Service Centre.
Service:
Our Customer Service Department
will repair faults not covered by
warranty or after the warranty period
has expired. Please send the product
well-packed to your nearest Service
Centre.
MANUFACTURER'S
1
3
5
YEAR
GB
WARRANTY
MANUFACTURER'S
YEAR
WARRANTY
MANUFACTURER'S
YEAR
WARRANTY
Dimensions H×W×D
82 × 86 × 99 mm
Mains power supply 230-240 V, 50 Hz
Output
Incandescent / halogen lamp load
Fluorescent lamps, electronic ballast
Fluorescent lamps, uncorrected
Fluorescent lamps, series-corrected
Fluorescent lamps, parallel-corrected
Low-voltage halogen lamps
LED < 2 W
2 W < LED < 8 W
LED > 8 W
Capacitive load
1000 W
430 W
500 VA
500 VA
500 VA
1000 VA
16 W
64 W
64 W
132 μF
Sensor technology Passive infrared
Angle of coverage 140° with sneak-by guard
Reach max. 14 m (temperature-stabilised)
via control dial
Time setting 3 min. factory setting /
1 s to 15 min with the app
Twilight setting 2-2000 lux via control dial and
with the app
IP rating IP54
Temperature range -20°C to +50°C
Z-Wave wireless range approx. 100 m
(unobstructed line of vision)
Radio frequency band 868 MHz
Transmitter power ≤ 2.5 mW
12. Technical specifications

STEINEL IS 140-2 Z-Wave Specifications

General

Brand	STEINEL
Model	IS 140-2 Z-Wave
Category	Security Sensors
Language	English