To Next PageTo Next Page
Need help?Do you have a question about the STEINEL Serie IS 180 and is the answer not in the manual?
General| Detection Angle | 180° |
|---|---|
| HF System | No |
| Protection Class | II |
| Reach | 12 m |
| Twilight Setting | 2000 lux |
| Application Place | Indoor |
| Installation Site | Wall |
| Power Supply | Mains |
| Frequency | 50 Hz |
| Material | Plastic |
| Color | White |
Overview of the device components, including lens, settings, and housing features.
Explanation of how the pyro sensors detect infrared heat from moving objects to activate consumers.
Details on dimensions, power output, voltage, coverage angle, and sensor reach.
Important warnings regarding power disconnection, professional installation, and circuit breaker requirements.
Recommendations for installation site, height, and preparation for wiring (flush or surface mounted).
Instructions for connecting the supply lead (L, N, PE) and the service lead (L', N, PE).
Details on adjusting switch-off delay (time setting) from 10 sec to 15 min.
Instructions for setting the sensor response threshold from 2 to 2000 lux.
Explanation of the two basic reach settings (5 m and 12 m) achieved by rotating the lens.
How to use shrouds to precisely adjust the detection zone for specific areas.
Illustrations of wiring for fixtures with and without neutral conductors, and for series/double-throw switches.
Guidance for issues like no power, failure to switch ON/OFF, or false triggering, with suggested solutions.
Information on the sensor's suitability for lighting and how weather conditions can affect its performance.
Instructions for cleaning the detection lens using a damp cloth.
Statement of compliance with European Low-Voltage and EMC Directives.
Explanation of the 36-month warranty, coverage, exclusions, and claim procedures.
Information on how to obtain repair service for faults outside the warranty period.
