STEINEL TR 100 - Package Contents; Installation Overview; Needed for installation; Intended uses

www.steinel.net (800) 852-4343
www.steinel.net (800) 852-4343
2
Package Contents
WARNING
• Turn power off at the circuit breaker before
installing the power pack
• Power Pack must be installed and used in
accordance with appropriate electrical codes and
regulations
• Installation by a qualified electrician is
recommended
• One TR 100 or TR 150
power pack
• Two lock nuts
• Installation instructions
3
Installation Overview
Intended uses
• For indoor use only
• The power pack can
used as a stand alone
unit, low voltage
switch, or can be
wired to a sensor for
automated control.
Needed for installation
• Power packs
should be installed
according to state,
local and national
electrical codes and
requirements.
• Low voltage wiring: at
least 22-gauge High
voltage wiring: at least
14-gauge
• For plenum return
ceilings, use UL listed
plenum-approved
cables.