STEINEL TR 100 User Manual

TR 100
TR 150
Installation Instructions
Power Pack
Consignes d'installation
Pack d'alimentation
English
Français
Made in
Romania
RoHS
Compliant
110011487 12/2011 Technical changes subject to no prior notifi cation.
STEINEL America Inc.
9O51 Lyndale Avenue South
USA - Bloomington, MN 55420
Tel: +1-952-888-5950
Fax: +1-952-888-5132
www.steinel.net

STEINEL TR 100 Specifications

General

Electronic transformer	Yes
For halogen lamps	Yes
Overload protection	Yes
Short-circuit protection	Yes
Overtemperature protection	Yes
Power	100 W
Protection Class	IP20
Mains supply	230 V
Output	12 V
Type of connection	Screw terminal
Input Voltage	230 V
Output Voltage	12 V

Summary

Package Contents

Installation Overview

Needed for installation

Power packs require installation per electrical codes. Specifies low voltage (22-gauge) and high voltage (14-gauge) wiring, and plenum-rated cables for ceilings.

Intended uses

For indoor use only. Can be used as a standalone unit, with a low voltage switch, or wired to a sensor for automated control.

Product Overview

Product description

TR 100/TR 150 power packs provide power to STEINEL low voltage sensors and control devices. TR 150 includes an isolated relay for HVAC/low voltage use.

Specifications

Lists technical specifications including voltage, output, load, environment, relay details, dimensions, warranty, and certifications.

Mounting

Mounting guidelines

Guidelines for mounting TR 100/TR 150 power packs to junction boxes, utilizing 1/2 inch knockouts.

Mounting instructions

Instructions for mounting include removing a lock nut, passing wires and nipple through a knockout, and tightening.

Wiring

TR 100 Wiring

Wiring diagram for the TR 100 power pack, showing connections for line voltage switch and momentary switch.

TR 100 Wiring with Momentary Switch

Detailed diagram of TR 100 power pack wiring, specifically for use with a momentary switch control.

TR 150 Wiring

Wiring diagram for the TR 150 power pack, including connections for line voltage, isolated relay, and BMS.

Operation

Automatic ON Mode

Enables automatic ON/OFF control via sensors, timers, or BAS. Default setting is mode switch to the right.

Manual ON

Allows manual ON operation via a momentary switch. Mode switch is set to the left for this function.

Isolated Relay (TR 150)

Details the TR 150's isolated relay specifications, including output types and current/voltage ratings.

LED Indicator

Describes the power pack's LED indicator, its meaning for relay status, overload, and over-temperature conditions.

Low Voltage Inputs

Explains the function of blue (control), orange (override ON), and brown (force OFF) low voltage input wires.

Troubleshooting

Warranty