3/96 1 - 2 09-282C
INTRODUCTION section 1
Specification
Overall width ________________35-5/8"
Overall height _______________44-1/2"
Overall length _______________53-1/4"
Chipper Knives _______________4hardened
Shredder Sections _____________72hardened
Rotor Diameter _______________18"
Rotor Width ________________12"
Rotor Speed (maximum) ___________1550 RPM
Shredder Throat Opening __________9-1/2" x 11"
Maximum material size for Shredder ______1-1/2" diameter x 24" long
Maximum material size for Chipper ______4"diameter
Application ________________Steiner 420, 425, 525
Power Units only
Weight __________________430lbs.
Specifications are subject to change without notice.
To Next Page
Loading...