2.3.f DBAL-I
2
Assembly
The DBAL-I
2
device provides an IR POINT and adjustable focus IR ILLUM. The
device is used for aiming, signaling, command and control, and for purposes
of supplying supplemental IR illumination.
2.3.g Plastic Case
The DBAL-I
2
is provided with a Shipping Case.
2.3.h Operator and Field Maintenance Manual
NOTE
You must read the entire Operator and Field Maintenance Manual before
operating the DBAL-I
2
and follow all WARNINGS, CAUTIONS and NOTES.
The Operator and Field Maintenance Manual provides safety information,
equipment information, operating instructions, mounting procedures, zeroing
procedures, and maintenance procedures.
17
2.3.e Battery
One 3V CR 123A battery is used as a power supply for operating the DBAL-I
2
(model dependent). The use of a high-quality battery is recommended.
To Next Page
Loading...
Need help?
General