2.3.a Tape Fastener Loop
The Tape Fastener Loop is provided to secure the Remote Cable Switch to the
weapon in a position convenient to the soldier.
2.3.b Tape Fastener Hook
The Tape Fastener Hook is pre-attached by the manufacturer to the pressure
pad switch.
2.3.c Remote Cable Switch
The 7” Remote Cable Switch allows the user to activate the DBAL-I
2
in a momentary (MOM) mode by depressing the pressure pad once. Double-
clicking the pressure pad will activate the DBAL-I
2
continuously for 5 minutes.
Pressing the pressure pad again will return the unit to momentary activation.
The pressure pad provides a tactile (silent) click that indicates when the
switch has been activated.
2.3.d Optical Instrument Reticle (OIR) (Pattern Generators)
NOTE
OIRs are not designed for accurate aiming of the weapon.
The Optical Instrument Reticles (OIR), also called Pattern Generators, are used
for command and control. When an OIR is installed in front of the IR POINT or
IR ILLUM that has been focused to a point, it will project the shape of a circle,
triangle, plus sign, square, or T-shape.
16
To Next Page
Loading...
Need help?
General