23
3.2.d Integrated Momentary Activation Switch
The Integrated Momentary Activation Switch is located on the top of the
DBAL-I
2
housing below the word FIRE. Firmly pressing and holding the switch
activates the DBAL-I
2
laser function selected by the Activation Mode Selector
Switch. When the switch is released, the DBAL-I
2
turns off.
Double-clicking the Integrated Momentary Activation Switch will activate the
DBAL-I
2
in a continuous ON mode for 5 minutes. Pressing the Integrated
Momentary Activation Switch once again will return the unit to the momentary
mode.
Figure 3.4 Integrated Momentary Activation Switch
To Next Page
Loading...